Images are by the courtesy of Nathan Marciniak.

Click the images below for large display.

SPECIFICATIONS

Input Impedance:
20K Ohms nominal

Output Impedance:
100 Ohms nominal

Distortion:
<.002% referred to 1 volt

Signal to Noise Ratio:
-100dbv; power supply harmonics typically less
than-92dbv

Channel Trim Range:
6db to 18db gain

Tracking Error:
0.1db max

Stereo Separation:
104 db at 1khz

Output Drive:
12 volts peak

Frequency Response
R = 10k ohms; less than 0.1db deviation from 20hz to 20khz. For 10k ohms in parallel with 10,000 picofarads of capacitance, 0.1db down at 20khz. The above measurement represents the unit driving 50' to 100' of cable.

Dimensions:
16.75" wide x 12" deep x 3.5" high (Rack mount handles available upon request)

Power Consumption:
Approx. 8 watts

Warranty:
The SCPA 1 is warranted to be free of defects for a period of 5 years from the date of purchase. Repairs will be performed without charge for parts and labor provided the unit is returned freight prepaid to R.E.Designs. Units that are in warranty that have manufacturer's defects will have the shipping cost reimbursed. Units which have beeen modified or subjected to gross abuse are excluded from warranty protection.